Catalog

Cerberus PRO catalog

Two FC722 panels, OP720 smoke, HI720 heat, the FDM225-RP call point and I/O modules. The price on the card is for the specification; shipment follows the site.

  1. 01

    Panels

    FC722-ZA (S54400-C29-A2) and FC722-ZZ (S54400-C29-A5). One two-loop platform, different language kits. Up to 252 C-NET addresses.

  2. 02

    Detectors

    OP720 (S54310-F1-A1) reads smoke by scattered light. HI720 (S54310-F4-A1) holds an A2S or A2R setting where a smoke detector does not belong.

  3. 03

    Call point

    FDM225-RP (A5Q00012020) sits on FDnet and C-NET. A plastic insert instead of glass, IP44, reset with a key.

  4. 04

    Modules

    Four relays: FDCIO222 and FDCIO224. Collective lines: FDCIO223. Inputs: FDCI222, FDCI221, plus the compact FDCIO221. Wet rooms take the FDCH221 housing.

Items: 12

FC722-ZA

Siemens FC722-ZA Cerberus PRO fire control panel

Compact Cerberus PRO FC722-ZA panel (S54400-C29-A2) in Comfort housing: two C-NET loops, expandable to four, up to 252 addresses. Stand-alone or clustered on C-WEB/SAFEDLINK — 32 panels, or 64 across a fibre C-WEB/LAN fabric that meets EN 54. Auto-learns devices, keeps 2000 events and watches loops for earth faults. Batteries and option cards are ordered separately.

Siemens FC722-ZA Cerberus PRO fire control panel

RUB 300,000 RUB 289,000 −4%

FC722-ZZ

Siemens FC722-ZZ Cerberus PRO fire control panel

FC722-ZZ (S54400-C29-A5) is the same two-loop Cerberus PRO platform as the ZA, packed for a different language kit. 252 C-NET addresses, growth to four loops, C-WEB/SAFEDLINK networking and Cerberus-Engineering-Tool. Built for hotels, workshops or as a node in a campus layout.

Siemens FC722-ZZ Cerberus PRO fire control panel

RUB 285,000 RUB 199,500 −30%

OP720

Siemens OP720 C-NET optical smoke detector

Point-type OP720 (S54310-F1-A1) watches smoke by scattered light on the C-NET loop of FS720 panels. It covers smouldering and flaming fires, sensitivity is picked at the panel, and a short-circuit isolator sits inside to EN 54-17. Order the LP720 base separately — the box holds the head and a dust cap. Pure-white ~RAL 9010 housing, IP40, or IP42 with an RS720 seal.

Siemens OP720 C-NET optical smoke detector

RUB 6,000 RUB 4,100 −32%

HI720

Siemens HI720 Cerberus PRO heat detector

HI720 (S54310-F4-A1) goes where an optical chamber fails: kitchens, laundries, dusty stores, steam. Two C-NET parameter sets — fixed A2S and rate-of-rise A2R — switch from the panel. Certified to EN 54-5 and EN 54-17. Order the base separately; the pack is the head plus a dust cap.

Siemens HI720 Cerberus PRO heat detector

RUB 4,800

FDM225-RP

Siemens FDM225-RP resettable manual call point

Addressable FDM225-RP call point (A5Q00012020), EN 54-11 type A: press the plastic insert for alarm, reset with a key — no glass. Talks FDnet and C-NET, isolator on board, IP44, red ~RAL 3000. Surface wiring needs the FDMH295-S back box ordered extra.

Siemens FDM225-RP resettable manual call point

RUB 4,800

FDCIO222

Siemens FDCIO222 4-in / 4-relay module

Addressable FDCIO222 (A5Q00002369) sits on FDnet or C-NET with four dry 250 V / 4 A relays and four supervised inputs. The panel drives doors, fans, lifts and access control; the inputs report position or raise alarm. Loop-powered, LED status, EN 54-17/18. Resistors and TS35 feet are in the box.

Siemens FDCIO222 4-in / 4-relay module

RUB 29,000 RUB 20,850 −28%

FDCIO224

Siemens FDCIO224 VdS extinguishing I/O module

FDCIO224 (A5Q00018689) shares the FDCIO222 body but wires the inputs for a VdS extinguishing-release interface. Four 230 V / 4 A relays and four supervised status inputs, power and address from FDnet/C-NET, LEDs on the board. For Sinteso FS20 and Cerberus PRO FS720.

Siemens FDCIO224 VdS extinguishing I/O module

RUB 38,000 RUB 22,800 −40%

FDCIO223

Siemens FDCIO223 collective-line transponder

FDCIO223 (S24218-B102-A1) hangs two independent sides on FDnet/C-NET: a GMT collective circuit, a conventional line, an intrinsically safe spur behind an SB3 barrier, a contact or 24 V control. Needs an 18–32 V supply; outputs 2×1 A or 1×1.5 A. The kit includes 560 Ω…3.3 kΩ resistors and TS35 clips.

Siemens FDCIO223 collective-line transponder

RUB 15,000

FDCI222

Siemens FDCI222 4-input FDnet / C-NET module

FDCI222 (A5Q00001984) only listens: four dry contacts watched for open and short with end-of-line resistors. Each input is a status or an alarm from the panel — doors, dampers, a sprinkler trip. Loop-powered, quiescent current up to 0.35 mA, TS35 mount.

Siemens FDCI222 4-input FDnet / C-NET module

RUB 13,000 RUB 7,150 −45%

FDCIO221

Siemens FDCIO221 1-in / 1-out module

Compact FDCIO221 (S54312-F2-A1) is a single control point at a door or damper. Supervised input; the output is either a 2 A dry relay or a 30 V monitored circuit (then add 24 V). Dry-contact mode takes power from the FDnet/C-NET loop. Housing 95×71×23 mm, three resistors and TS35 feet in the pack.

Siemens FDCIO221 1-in / 1-out module

RUB 4,700

FDCI221

Siemens FDCI221 single-input FDnet / C-NET module

FDCI221 (S54312-F1-A1) brings one dry contact onto the panel: a door switch, a damper relay, an external alarm. The line is watched for open and short; the message type is set in Cerberus-Engineering-Tool. Loop-powered, up to 0.3 mA at rest, two resistors and DIN-rail feet included.

Siemens FDCI221 single-input FDnet / C-NET module

RUB 4,600

FDCH221

Siemens FDCH221 IP65 housing for I/O modules

FDCH221 (S54312-F3-A1) is a 207×119×48 mm sealed box for FDCI/FDCIO modules that cannot live inside a cabinet. With the gasket it reaches IP65 for damp or dusty rooms. M20 glands and locknuts are extra (A5Q00004478 / A5Q00004479).

Siemens FDCH221 IP65 housing for I/O modules

RUB 1,900

Questions

Answers for this sheet

01

How does FC722-ZA differ from FC722-ZZ?

One Cerberus PRO platform: two C-NET loops, up to 252 addresses, room to grow to four. ZA is order no. S54400-C29-A2, ZZ is S54400-C29-A5. The housing language kit is what changes.

02

When does HI720 replace OP720?

OP720 reads smoke by scattered light where the air stays clean. HI720 goes into kitchens, steam and dust: the panel picks a fixed A2S threshold or rate-of-rise A2R.

03

Which module shuts down HVAC and lifts?

FDCIO222. Four dry 250 V / 4 A relays drive doors, fans and lifts. Four inputs confirm that a damper or door has moved.

04

What releases extinguishing?

FDCIO224. Four 230 V / 4 A relays, with the inputs wired for a VdS interface to the release device.

05

How do you order?

Send a request from the site or call +7 920 000-46-56. The store is at Verkhnelikhoborskaya st. 8A, Moscow. There is no checkout: we reply with a specification and a lead time.